RO*826 L24 CLAAS Xerion

Turn angle:
horizontal min. ± 60°, vertical min. ± 20°


Selection table

Order No. S (t) D (kN) ABG (M) EG (e1)
RO 826 L 2437 2 4.0 120 yes yes
RO 826 L 2467 2* 4.0 120 yes yes
RO 826 L 2477 2** 4.0 120 yes yes

* with forced steering ball 50

** with forced steering pin 30

Equipment

Description Order No.
forced steering K50 right ROE 75 L 093
forced steering K50 left ROE 75 L 094
forced steering pin right ROE 75 L 136
forced steering pin left ROE 75 L 137

Technical data

according to ISO 24347

Remarks

If a drawbar anchor pin ø 40 mm is used, please mount clamping pin 50 x 50 St. ISO 13337 in the bore hole (CLAAS Order No. 00 0217 9800).

RO*826 L 24

Selection table

Item Description Pieces Order No.
1 ball 80 flange without screws 1 ROE 75 L 082
2 screw set for ball 80 1 ROE 75 L 084
3 spare part spacer plate 1 ROE 75 L 223
4 spare part keeper inclusive 8 1 ROE 75 L 089
4+7 spare part set keeper with safety system 1 ROE 75 L 146
5+6 funnel with screws 1 ROE 75 L 234
7 safety pin for down-holder 1 ROE 75 L 126
8 adjustment screw for keeper 1 ROE 75 L 001
9 forced steering K50 left 1 ROE 75 L 094
10 forced steering K50 right 1 ROE 75 L 093
11 orced steering B30 left 1 ROE 75 L 137
12 forced steering B30 right 1 ROE 75 L 136
13 dust cap 1 ROE 25522
14 spare part bolt ZWL B30 1 ROE 75 L 229
15+16 Spare part ball ZWL K50 1 ROE 75 L 043
17 keeper ZWL K50 1 ROE 75 L 044
18 spare part distance wedge both sides 1 ROE 75 L 198